DIY Guide to Removing a Toilet without Breaking a Sweat


Junk Removal Advice:

If you’re planning to renovate your bathroom, one of the tasks you’ll likely have to undertake is removing the toilet. This can be a daunting task – but it doesn’t have to be. With a little bit of preparation and some careful steps, you can remove your toilet without breaking a sweat.

As a general procedure, here is how you remove a toilet:

1. Check the bathroom floor plan and disconnect the water supply.

2. Flush the toilet to empty the bowl of water.

3. Disconnect the toilet flange from the toilet.

4. Disconnect the toilet from the floor.

5. Lift the toilet out.

Can I remove a toilet myself?

Yes, you can remove a toilet yourself – but it’s not always easy. If you’re comfortable using basic tools and have some experience with plumbing, you should be able to get the job done. However, if you’re unsure of your abilities or uncomfortable working with plumbing fixtures, it may be best to call in a professional.

image 11

DIY Vs Hire a Pro:

Many homeowners face the decision of whether to tackle a home improvement project themselves or hire a professional. For toilet removal, it is generally best to hire a pro. toilet removal can be tricky, and if not done correctly, can result in serious damage to your home.

Potential damages for a DIYer

A toilet that is not properly supported can leak, and the weight of the toilet can cause serious structural damage. In addition, there is a risk of water damage if you do not turn off the water or break a pipe during the process.

Of course, hiring a professional will cost you money, but it is generally worth the peace of mind and safety that comes with having the job done right.

How much does it cost to remove bathroom toilet?

The cost of removing a toilet can vary depending on the contractor you hire and the location of the toilet. However, most professionals charge between $75 and $150 per hour to remove a toilet. So, if you’re doing the job yourself, it’s important to factor in your time as well.

How to find a reputable plumber to remove your toilet?

The toilet is one of the most important fixtures in any home, so it’s important to keep it in good working order. If you’re toilet is having problems, it’s best to call a professional plumber to diagnose and fix the issue. But how do you find a qualified plumber in your area?

Ask for Referrals

One way to find a local plumber is to ask your friends, family, and neighbors for recommendations. If someone you trust has had a good experience with a particular plumber, they’re likely to be just as pleased with their work. Another option is to check online review sites like Angie’s List or YelpOpens in a new tab.. Here, you can read customer reviews and get an idea of which plumbers are reputable and which ones you should avoid.

Make sure they are licensed and insured

Once you’ve found a few potential candidates, be sure to ask them about their experience, licensing, and insurance. You should also inquire about pricing upfront so there are no surprises later on. With a little research, you can be confident that you’re hiring a qualified professional who will get the job done right.

Questions to ask to make sure your plumber is qualified

When it comes to finding a qualified plumber, there are a few key questions you should ask.

First, find out how long they have been in business. A longer history usually indicates a higher level of experience and expertise.

Second, ask for references from past clients. This will give you a good sense of the quality of their work.

Finally, be sure to ask about their licensing and insurance. This will protect you in case of any damages or accidents that occur during the job. By asking these questions, you can be confident that you are hiring a qualified professional who will get the job done right.

image 14

What tools do you need to take a toilet off?

In order to remove a toilet, you’ll need a few basic tools:

adjustable wrenchOpens in a new tab.

screwdriverOpens in a new tab.

pliersOpens in a new tab.

bucketOpens in a new tab.

toilet plungerOpens in a new tab.

putty knifeOpens in a new tab.

wet dry shop vacuumOpens in a new tab.

image 13

Which stores should I buy tools for my toilet removal project?

There are a few different stores you can buy tools for your toilet removal project from. The first is your local hardware store. They will have all the basic tools you need to get the job done, like a plunger, a screwdriver, and a wrench.

Local retailers

The second option is a home improvement store like Home DepotOpens in a new tab. or LowesOpens in a new tab.. They will have a better selection of tools, including an auger and a power drill.

Online retailers

The third option is an online retailer like Amazon. They will have the widest selection of tools, but you will have to pay for shipping. Whichever store you choose, make sure to get everything you need before starting your project.

Cost of Toilets by Type

Low-flow vs standard flow toilets

Most toilet models fall into one of two categories: low-flow, standard flow and dual flush toilets. Low-flow toilets use less water per flush than standard toilets, making them a more efficient and environmentally friendly option. They can also save you money on your water bill.

Standard flow toilets

Standard toilet models vary in price depending on their features, but generally cost between $100 and $300. Low-flow toilet models cost slightly more, but typically fall in the same range.

Dual flush toilets

These toilets are a type of toilet that offers two different flushing options, typically a full flush for solid waste and a reduced flush for liquid waste. This allows the user to conserve water by choosing the appropriate flush option depending on the type of waste being disposed. These toilets typically use less water overall than traditional toilets, making them a more environmentally friendly option. In addition, they may also reduce costs associated with water usage, as less water is required to maintain the toilet bowl. As a result, dual flush toilets offer many benefits and are an increasingly popular option for homeowners and businesses alike.

How to remove a toilet – the basics

To remove a toilet, you’ll need to first disconnect the water supply and the toilet flange from the toilet. Once that’s done, you can then disconnect the toilet from the floor and lift it out.

Here are the steps:

1. Check the bathroom floor plan and disconnect the water supply.

2. Flush the toilet to empty the bowl of water.

3. Disconnect the toilet flange from the toilet.

4. Disconnect the toilet from the floor.

5. Lift the toilet out.

How to remove a toilet – avoiding common mistakes

When removing a toilet, there are a few common mistakes that people make. Avoiding these mistakes will help to make the process go smoothly.

1. Don’t use too much force.

2. Be careful not to drop the toilet.

3. Make sure the new toilet is installed correctly before you remove the old one.

How to Remove Rusty Floor Bolts?

If your toilet is fitted with rusty toilet bolts, you’ll need to take a few extra steps to remove them. First, use a screwdriver to remove the toilet seat and toilet cover. Then, use a wrench to loosen the toilet bolts. If they’re too rusty to loosen, you can use a hacksaw to cut through them.

Move with caution

Once the toilet bolts are removed, you can lift the toilet off the floor and carry it out of the bathroom. Be careful not to drop it, as this could damage the toilet or injure you.

How to remove a toilet – tips and tricks

Here are a few tips and tricks that can help to make removing your toilet easier.

1. Make sure the water supply line is turned off at the shut-off valve.

2. Use a toilet plunger to dislodge any stubborn waste in the bowl before you begin.

2. Check to see if the toilet flange and wax ring are loose. If it is not, loosen it with a wrench.

3. Apply some WD-40 or other lubricant to the floor bolts holding the toilet in place. Also apply to a wax ring if needed. This will make them easier to remove.

4. Have a friend help you to lift the toilet out, especially if it’s a heavy one.

5. If the toilet is still stuck, you may need to call a professional for help.

Summary on how to remove a toilet

Removing a toilet may seem like a daunting task, but it doesn’t have to be. With a little bit of preparation and some careful steps, you can remove your toilet without breaking a sweat. Just be sure to disconnect the water supply, flush the toilet to empty the bowl, and disconnect the toilet flange from the toilet before you begin. And if you’re having trouble, don’t hesitate to call a professional for help.

How to install a new toilet

Once you’ve removed the old toilet, it’s time to install the new one. Here are the steps:

1. Apply some silicone sealant to the flange on the floor.

2. Place the toilet on the flange.

3. Tighten the bolts that hold the toilet in place.

4. Reconnect the water supply and toilet flange to the toilet.

5. Flush the toilet to check for leaks.

Tips and Tricks for preventing leaks on a new toilet installation

Before you begin installation, there are a few toilet concerns you need to be aware of. The first is that the new toilet bowl needs to be level. This is important because it ensures that the toilet flushes evenly and doesn’t create a weak spot that could lead to leaks.

The second concern is that the toilet bowl should be firmly attached to the floor. This is important for stability and preventing leaks.

The third concern is that the toilet bowl should be properly sealed. This helps to prevent odors from escaping and also prevents water from seeping out of the toilet.

Height considerations

Finally, you need to make sure that the toilet is installed at the correct height. If the toilet is too low, it may be difficult for people to use it. If it is too high, it may be uncomfortable to sit on. With these concerns in mind, you can be sure that your toilet installation will go smoothly.

Preventing leaks on your new toilet flanger

In addition to the toilet bowel being installed correctly. Another important aspect of installing the toilet is ensuring the flanger is properly secured to the floor. If the flange is not properly attached, it could result in leaks or other problems. In addition, it is important to make sure that the toilet is properly aligned with the flange.

An incorrectly installed toilet can cause a number of problems, including leaks, overflows, and even toilet bowl breakage. As a result, it is important to take the time to ensure that the toilet is properly installed before use.

How to clean your toilet

Now that the toilet installation phase is complete, it’s time to give it a good cleaning. Here are a few tips:

1. Use a toilet brush to scrub the inside of the bowl.

2. Pour some bleach or other disinfectant into the bowl and let it sit for a while.

3. Use a wet rag to wipe down the outside of the toilet.

How to get rid of your old toilet

To get rid of your old toilet, there are a few different options available to you. The first option is to simply take it to your local landfill. Many landfills will accept old toilets for disposal. However, this option can be expensive and it may not be the most environmentally-friendly choice.

Donate to a charity

Another option is to donate your old toilet to a local Habitat for Humanity ReStoreOpens in a new tab. or other similar organization. These types of organizations often accept old toilets and other fixtures for reuse in their construction projects. This is a great way to get rid of your old toilet while also helping out a good cause.

Sell it online

Finally, you could also try selling your old toilet on classifieds websites like Craigslist Opens in a new tab.or eBayOpens in a new tab.. You might be surprised at how much someone is willing to pay for a used toilet! Just be sure to list the condition of the toilet truthfully in your listing.

How to fix a running toilet

If your toilet is running, it’s probably because the flapper needs to be replaced. Here are the steps:

1. Turn off the water supply to the toilet.

2. Flush the toilet to empty the tank of water.

3. Remove the old flapper from the toilet tank.

4. Install a new flapper in the toilet tank.

5. Turn on the water supply and flush the toilet to check for leaks.

How to unclog a toilet

If your toilet is clogged, there are a few things you can try to clear the blockage. Here are a few tips:

1. Use a toilet plunger to try to dislodge the blockage.

2. Pour some hot water into the toilet bowl to try to melt the blockage.

3. If neither of these methods work, you may need to call a professional for help.

If your toilet is clogged, there are a few things you can try before calling a plumber.

Using Draino to unclog a toilet

If you’ve ever tried to unclog a toilet with a plunger, you know that it can be a messy and frustrating experience. But there’s an easier way. Just pour a cup of drain cleaner into the toilet bowl and let it sit for 15 minutes. Then flush and voila! The clog will be gone. Just be sure to use gloves and ventilate the area well, as drain cleaner is harsh on both skin and lungs.

Using a toilet snake to unclog a toilet

A toilet snake is a long, flexible rod that is used to clear blockages from toilet drains. To use a toilet snake, simply insert the rod into the toilet bowl and push it down the drain. The snake will then twist its way through the drain, clearing any obstructions in its path. If the blockage is particularly stubborn, you may need to use a plunger to help dislodge it. Once the toilet is unclogged, flush it several times to remove any debris that may have been dislodged during the snaking process.

Summary on removing a toilet without breaking a sweat

So, there you have it – our guide to removing a toilet without breaking a sweat. We hope you found it helpful! If you’re still having trouble, don’t hesitate to call a professional for help. And be sure to check out our other guides on how to install a new toilet and how to clean your toilet. Thanks for reading!

Want to remove your toilet without any hassle?

Looking to remove your toilet without any hassle? Junk Hauling Express can help! We offer free estimates, so call us today and let us take care of the hard work for you.

image 12

To find out how to dispose of electronics, click here.Opens in a new tab.

Book Now

Junk Removal AdviceOpens in a new tab. services the following cities in Florida: Naples, Marco Island, Bonita Springs, Estero, Golden Gate City and Fort Myers. Book your free no-obligation quote by clicking here.Opens in a new tab.

Junk Hauling Express

To learn more about our services, coverage area and pricing, visit our sister site by clicking hereOpens in a new tab.

Brandon Louisseize

Brandon Louisseize is a responsible and visionary leader whose charisma and character reflects in everything he does. Raised in Miami, Florida, Brandon moved to Naples in 2001, where he seeks to provide stress-free and comprehensive demolition and junk removal services to residential homeowners and commercial companies. Brandon and his team maintain professionalism and strive to go above and beyond to give you high-quality and premium services. He guarantees you a smooth and pleasant experience. His educational background in Business Administration has equipped him with solid project management, organizational and financial management skills. Brandon prides himself on his strong work ethic and hard work. Brandon is a valuable member of Junk Hauling Express and has been monumental in its success by helping streamline its operations to make it an industry leader in the Naples community. Before joining Junk Hauling Express, he worked at College Hunks Hauling Junk Naples FL Company. While there, he diligently worked his way up and earned a promotion to General Manager in charge of operations in Naples. Brandon is passionate about community service and giving back to society. He has helped produce the first docuseries for his community’s semi-pro football team, the Florida Stingrays. Brandon is responsible and efficient and is ready to help you clear your debris safely and efficiently. His excellent listening skills and attention to detail give him an upper edge. Brandon is just a phone call away if you're looking for holistic and affordable demolition, site cleanup, and junk removal services. When he is not working, Brandon loves to play football and spending quality time with his nieces and nephews. He has been monumental in the success of Junk Hauling Express, where he helped streamline the company’s operations to being profitable and sustainable.

Recent Posts